Loading... Please wait...

MacDermid Product

p09.jpg    MacDermid Liquid Photopolymer series 

 

MacDermid LTL liquid photopolymer is a 32 durometer (Shore A) resin designed specifically to provide thick photopolymer printing plates for the corrugated market.

LTL and 36R resin offers tack-free properties for excellent solids coverage, high resilience for lint-free printing, and easy cleanup on press, saving precious time and money.

Photopolymer LTL is dyed red, 36R transparent Orange to improve the contrast so that mounting is easier.

With MacDermid or CrownFlex plate making systems1523/1723/2030/3050/4260/5280),able to produce varies printing image size of plates. Perfect, innovative and excellent printing, assist in corrugated printing market expend.

 

MacDermid –
LTL Photopolymer

p10.jpg

KEY FEATURES :

  • Extremely low tack plate gives clean running on press
  • Excellent durability with UV, heat and humidity stability
  • Wide imaging latitude easily images a variety of copy, including fine detail
  • Highly resilient plate with exceptional ink transfer
  • Ability to cap for reduced fluting
  • Ability to use soap and water washout
  • High fraction resistance, able to print up to 300pcs/min
  • Non solvent nor VOC evaporated, eco-friendly, not harmful to human

 

 

Plate Specification

Plate Thickness: 2.00–7.00mm
Base Thickness: 1.20–4.20mm
Relief Height: 0.80 – 2.80mm
Tone Reproduction: 2 – 95 %
Max Line Screen: *100LPI
Hardness shore ‘A’:32 ±1

Characteristic :

Viscosity (25ºC): 32,000cps
Appearance: Red
Cloud & Freezing point: 0º
Storage self-life: 24months

Packing

20kg plastic container with ±18kg net weight

Country of Origin:

Australia

*Plate Processing :

Back exposure: 90–450sec.
Face exposure: 3–25 mins.
Washout: 10 – 25mins
Wet-cure: 15 – 20mins
Drying: 10 – 15mins
Dry detack: 10 – 18mins

MacDermid –
36R Photopolymer

p11.jpg

 

KEY FEATURES :

  • Low tack plate gives clean running on press
  • High resilient plate with good in ink transfer
  • Wide imaging latitude easily images a variety of copy, including fine detail
  • Ability to use soap and water washout
  • Able to print up to 200pcs/min

 

 

 

Plate Specification

Plate Thickness: 2.00–7.00mm
Base Thickness: 1.20–4.20mm
Relief Height: 0.80 – 2.80mm
Tone Reproduction: 2 – 95 %
Hardness shore ‘A’:35 ±1

Max Screen Lin:
3%, 55LPI (Digital print Neg.)
5%, 75LPI (Conventional Neg.)

Characteristic :

Viscosity(25ºC): 30,000 - 36,000cps
Appearance: Orange / Red
Cloud & Freezing point: 0º
Storage self-life: 24months

Packing

20kg plastic container with ±18kg net weight

Country of Origin:

Australia       

*Plate Processing :

Back exposure: 45–210sec.
Face exposure: 2–15 mins.
Washout: 10 – 15mins
Wet-cure: 15 – 20mins
Drying: 5 – 10mins
Dry detack: Not applicable 

*Processing requirement may vary with different plate thickness, and plate making system.